Register
Free toolNo sign-up

Support & Resistance Points for Nifty

Pivot points are price levels calculated from the previous period's high, low and close. Day traders use them as possible support and resistance for the current session. Because everyone calculates them the same way, many traders watch the same levels, which gives them some influence on intraday trading in Nifty, Bank Nifty and liquid stocks.

Pivot points: standard, Fibonacci and Camarilla
25,053.33Pivot
Previous range260.00 pts
Standard R1 / S125,187 / 24,927
Fibonacci R1 / S125,153 / 24,954
Levels for the next session
LevelStandardFibonacciCamarilla
R4——25,203.00
R325,446.6725,313.3325,131.50
R225,313.3325,214.0125,107.67
R125,186.6725,152.6525,083.83
Pivot25,053.3325,053.33—
S124,926.6724,954.0125,036.17
S224,793.3324,892.6525,012.33
S324,666.6724,793.3324,988.50
S4——24,917.00

Fibonacci levels use 38.2%, 61.8% and 100% of the previous range. Camarilla levels are measured from the close.

Turn pivot levels into entry and exit conditions.See signal trading

The calculator above gives you three sets of levels at once: standard pivots, Fibonacci pivots and Camarilla pivots. Enter the previous day's high, low and close of the instrument you trade, and it returns the pivot, the previous range and every support and resistance level for the next session. This page explains how each set is calculated, which high, low and close to use for Indian markets, how traders read the levels, three worked examples with rupee figures, the common mistakes, and the limits of any level drawn from yesterday's prices.

What the pivot point calculator does

PartWhat it does
InputsThe previous period's high, low and close
PivotThe average of the high, low and close
Standard levelsR1 to R3 above the pivot and S1 to S3 below it
Fibonacci levelsR1 to R3 and S1 to S3 at 38.2%, 61.8% and 100% of the previous range
Camarilla levelsR1 to R4 and S1 to S4, measured from the close
Previous rangeThe high minus the low, in points
ChecksThe high must be at or above the low, and the close must lie between them
PeriodAny period you choose: a day, a week or a month, as long as all three inputs come from it

The calculator is free and needs no login. Nothing you enter is stored.

A short history of pivot points

Pivot points began on the trading floors of the American futures exchanges. Before screens and charting software, floor traders in Chicago needed a quick way to mark the levels where the day's buying and selling might change. Each morning they took the previous session's high, low and close, worked out an average, and drew a handful of support and resistance levels from it with pencil and paper. The method spread because it was fast, needed no judgement and gave every trader in the pit the same numbers.1

The basic formula, the pivot as the average of the high, low and close, became the standard version that most charting software still calls "classic" or "floor" pivots. Over the following decades traders added variants. Fibonacci pivots kept the same central pivot but placed the other levels at Fibonacci fractions of the previous range. The Camarilla equation, developed by the bond trader Nick Scott in 1989, measured levels from the previous close rather than from the pivot, and gave much tighter levels suited to short intraday trades. Other versions, such as Woodie's pivots, gave the close more weight.2

In 2010 Frank Ochoa's book on pivot trading brought these methods together and popularised the central pivot range, the band around the pivot that many Indian intraday traders now watch.2 Indian traders took up pivots in large numbers as intraday trading in Nifty futures and index options grew through the 2010s. Today pivot levels appear on most broker charts in India, and many traders plan the day around them before 9:15 am.

Standard pivot points

Using the previous period's high (H), low (L) and close (C):

  • Pivot (P) = (H + L + C) ÷ 3
  • R1 = 2 × P − L
  • S1 = 2 × P − H
  • R2 = P + (H − L)
  • S2 = P − (H − L)
  • R3 = H + 2 × (P − L)
  • S3 = L − 2 × (H − P)

R levels are resistance above the pivot; S levels are support below it. R1 and S1 are the nearest levels and are reached on most days. R2 and S2 mark a wider move, and R3 and S3 are reached only on days with a large range.

The logic is simple. The pivot is the average price of the previous session, a rough measure of where value sat. R1 and S1 reflect the previous day's extremes around that average. R2 and S2 add the full previous range to the pivot. R3 and S3 stretch further still.

Fibonacci pivot points

Fibonacci pivots use the same pivot but place the other levels at Fibonacci ratios of the previous range:

  • R1 = P + 0.382 × (H − L)
  • R2 = P + 0.618 × (H − L)
  • R3 = P + 1.000 × (H − L)
  • S1 = P − 0.382 × (H − L)
  • S2 = P − 0.618 × (H − L)
  • S3 = P − 1.000 × (H − L)

The ratios 38.2% and 61.8% come from the Fibonacci sequence, the same ratios traders use for retracements. Fibonacci R1 and S1 usually sit a little closer to the pivot than standard R1 and S1, and Fibonacci R3 and S3 equal standard R2 and S2.

Camarilla pivot points

Camarilla levels are measured from the previous close (C), not from the pivot, using 1.1 times the previous range (H − L):

  • R1 = C + 1.1 × (H − L) ÷ 12
  • R2 = C + 1.1 × (H − L) ÷ 6
  • R3 = C + 1.1 × (H − L) ÷ 4
  • R4 = C + 1.1 × (H − L) ÷ 2
  • S1 = C − 1.1 × (H − L) ÷ 12
  • S2 = C − 1.1 × (H − L) ÷ 6
  • S3 = C − 1.1 × (H − L) ÷ 4
  • S4 = C − 1.1 × (H − L) ÷ 2

The Camarilla levels are much closer together than the other two sets. Traders who use them usually treat R3 and S3 as the levels where the price may turn back, and R4 and S4 as the levels where a break may lead to a trend for the day.

Other variants

The calculator shows the three sets most traders use. Two others appear on some charts:

  • Woodie pivots give the close double weight: P = (H + L + 2 × C) ÷ 4.
  • DeMark pivots change the formula depending on whether the close was above, below or equal to the open.

The principle is the same in every case: levels for today drawn from yesterday's prices.

A worked example on Nifty

Suppose yesterday Nifty had a high of 25,180, a low of 24,920 and a close of 25,060. The range is 260 points, and the pivot is (25,180 + 24,920 + 25,060) ÷ 3 = 25,053.33.

LevelStandardFibonacciCamarilla
R4——25,203.00
R325,446.6725,313.3325,131.50
R225,313.3325,214.0125,107.67
R125,186.6725,152.6525,083.83
Pivot25,053.3325,053.33—
S124,926.6724,954.0125,036.17
S224,793.3324,892.6525,012.33
S324,666.6724,793.3324,988.50
S4——24,917.00

Three things stand out:

  • The three sets disagree. Standard R1 is 25,186.67, Fibonacci R1 is 25,152.65 and Camarilla R1 is 25,083.83. A trader who says "Nifty is at R1" needs to say which R1.
  • Camarilla is tight. All eight Camarilla levels sit within 286 points, about 1.1 times the previous range. Standard levels span 780 points.
  • Some levels cluster. Standard S1 (24,926.67) and Camarilla S4 (24,917.00) are within 10 points of each other and of yesterday's low of 24,920. Where levels from different methods and the previous day's extremes meet, many traders give the area more weight.

What one lot means in rupees

A Nifty futures lot is 65 units since the lot sizes were revised at the end of 2025.4 Every point is ₹65 for one lot.

Take a trader who buys one lot of Nifty futures near the standard pivot at 25,053, with a stop below standard S1 at 24,925 and a target at standard R1, 25,185:

  • Risk: 25,053 − 24,925 = 128 points, or 128 × 65 = ₹8,320.
  • Reward: 25,185 − 25,053 = 132 points, or 132 × 65 = ₹8,580.
  • Reward to risk: about 1 to 1.

Charges come off both sides. Since 1 April 2026 the securities transaction tax on futures is 0.05% of the sell value, up from 0.02%.5 On a sale of one lot near 25,185, that is 25,185 × 65 × 0.05% ≈ ₹818 of STT alone, before brokerage, exchange charges, stamp duty and GST. A round trip of one Nifty futures lot now costs roughly ₹950 to ₹1,000 at ₹20 an order. On a 132-point target, charges take about 11% of the gross profit. Pivot trades with small targets suffer the most from this.

Which high, low and close to use

The formulas are simple. The inputs are where traders go wrong.

Index or futures

The Nifty 50 index and Nifty futures have different highs, lows and closes. Futures trade at a premium or discount to the index, and their range can differ by several points. Calculate from the instrument you trade. If you trade Nifty options, many traders use the index, because option strikes and premiums follow the index. If you trade Nifty futures, use the futures.

Which close

On the NSE, the closing price of a stock is not simply the last traded price. It is the weighted average price of the trades in the last 30 minutes of the session.3 The closing value of an index is calculated from the closing prices of its constituents. Charting software usually takes the close from its own data feed, which may be the last traded price instead. The difference is often small, but it moves every level. Pick one source and stay with it.

Which session

Indian equity and F&O markets trade from 9:15 am to 3:30 pm. Pre-open trades from 9:00 am to 9:08 am set the opening price of stocks but are not part of the normal session's high and low on most charts. Commodity contracts on MCX trade into the night, so a "day" for crude oil or gold runs well past 3:30 pm. Use the full session of the contract you trade.

Gaps and holidays

After a holiday or a weekend, the previous session is the last trading day. After a large gap at the open, yesterday's levels may sit far from today's price. The calculation is still correct; it just may not matter on that day.

Daily, weekly and monthly pivots

The same formulas work on any period, as long as all three inputs come from it:

PeriodInputsWho uses it
DailyPrevious day's high, low and closeIntraday traders
WeeklyPrevious week's high, low and closeSwing traders and option sellers holding for a few days
MonthlyPrevious month's high, low and closePositional traders and investors

For a monthly pivot on a stock, take the month's highest high, lowest low and the last session's close, not the averages of the daily figures. The same applies to a week: the week's extremes and Friday's close, or the last trading day's close when Friday is a holiday.

Longer-period levels are further apart and change less often. Many traders use the weekly pivot as the bias for the week and the daily pivots for entries. When a daily level falls close to a weekly level, they treat the area as stronger than either alone.

How traders read pivot levels

Bias for the day

If the market opens and holds above the pivot, many traders lean bullish for the day; below it, bearish. "Holds" matters: an open above the pivot that falls back below it in the first half hour is a weaker signal than an open that never comes back.

Targets and stops

The levels give ready-made targets and stops. A trader buying near the pivot may target R1, with a stop below S1. A trader selling at R1 may target the pivot. Because the levels are set before the open, the reward and risk of each trade are known in advance, as in the rupee example above.

Bounces and breaks

At each level, the price either reacts or breaks through. Traders wait for evidence before acting: a candle that tests S1 and closes back above it suggests a bounce, while a 15-minute close below S1 with rising volume suggests a break. Pivot levels work best combined with price action. See the support and resistance strategy for how traders decide between a bounce and a break.

Confluence

Many traders look for places where several things meet: a pivot level, a round number such as 25,000, the previous day's high or low, a weekly level or the VWAP. A level with several reasons behind it attracts more orders than a level with one.

Pivots and the central pivot range

The central pivot range (CPR) adds two levels around the pivot, based on the midpoint of the high and the low. Its width is used to judge whether a day is likely to trend or stay in a range: a narrow CPR is often read as a possible trending day and a wide CPR as a possible range day. The CPR calculator gives the CPR and the standard pivot levels together.

A worked example: a trading day around the pivots

Take the levels from the Nifty example. The pivot is 25,053.33, standard R1 is 25,186.67 and standard S1 is 24,926.67. Here is how a rule-based trader might plan the day before the open:

  1. Bias rule. If Nifty futures trade above the pivot at 9:45 am, look only for longs; below it, only for shorts.
  2. Entry rule. Buy on the first 15-minute candle that closes above the pivot after touching it.
  3. Stop. 10 points below the low of the entry candle.
  4. Target. Standard R1.
  5. Time exit. Close any open position at 3:10 pm.

Now suppose the day goes like this. Nifty opens at 25,090 and dips to 25,048 by 10:15 am. The 10:15 to 10:30 candle closes at 25,071, above the pivot, with a low of 25,046. The trader buys one lot at 25,071 with a stop at 25,036. By 1:40 pm Nifty reaches 25,187, and the target fills.

  • Profit before charges: 25,187 − 25,071 = 116 points × 65 = ₹7,540.
  • Charges for the round trip: roughly ₹950 to ₹1,000.
  • Profit after charges: about ₹6,550.

On another day the same rules could lose the 35-point stop, about ₹2,275 plus charges. The rules do not say which day will come. That is what a backtest across many days is for.

A worked example: weekly pivots on Bank Nifty

Swing traders and option sellers often work with weekly levels. Suppose last week Bank Nifty had a high of 57,400, a low of 56,200 and a close of 57,050. These figures are an illustration.

  • Weekly pivot = (57,400 + 56,200 + 57,050) ÷ 3 = 56,883.33
  • Weekly R1 = 2 × 56,883.33 − 56,200 = 57,566.67
  • Weekly S1 = 2 × 56,883.33 − 57,400 = 56,366.67
  • Weekly R2 = 56,883.33 + 1,200 = 58,083.33
  • Weekly S2 = 56,883.33 − 1,200 = 55,683.33

An option seller who expects Bank Nifty to stay inside the week's levels might sell a call above weekly R2 and a put below weekly S2, with a stop if the index closes beyond R1 or S1 on any day. That is a choice about risk, not a forecast: the levels give a structure to the trade, and the trader still decides the size and the exits. A Bank Nifty lot is 30 units, so each point is ₹30 a lot.4

Pivot points compared with other intraday levels

Pivots are one of several sets of levels day traders watch. Each answers a slightly different question:

LevelComes fromKnown before the open?What it tells you
Pivot pointsPrevious high, low and closeYesWhere yesterday's value and extremes sit
Central pivot rangePrevious high, low and closeYesWhether the day may trend or range
Previous day's high and lowPrevious sessionYesWhere yesterday's buyers and sellers stopped
Opening rangeFirst 15 or 30 minutes of todayNo, after the range formsToday's early balance and its breakout
VWAPToday's trades weighted by volumeNo, it moves through the dayThe average price paid today
Round numbersThe price itselfYesWhere many orders and option strikes cluster

A practical difference: pivots and the CPR are fixed for the whole day, so a plan can be written before 9:15 am. The opening range and VWAP change with today's trading, so they suit rules that react during the session. Many traders combine one fixed level with one moving level, for example a bias from the pivot and an entry on a break of the opening range.

How to test pivot rules on past data

A pivot rule is easy to test because the levels are known in advance. A simple test plan:

  1. Write the rule completely. Which pivot set, which instrument, which candle size, the entry, the stop, the target, the time exit and what to do on gap days.
  2. Choose the period. At least a year of daily sessions, so the test covers rising, falling and quiet markets, and both the old and new Nifty expiry days.
  3. Count costs. Use the post-April 2026 STT and your broker's brokerage. A rule that wins small amounts often looks good before costs and poor after them.
  4. Look at the trade list. Open the worst days and check that the stop and target fired where you expected.
  5. Change one thing. Try S1 instead of S2 for the stop, or Fibonacci instead of standard levels. If the result swings from a profit to a loss, the rule is fragile.
  6. Run it forward. Run the same rule on live prices for a few weeks with no real money before trading it.

The numbers from the calculator and the result of the test are two different things. The first is arithmetic; the second is evidence.

Pivot points on the chart and in rules with QuantPower

The calculator gives you the numbers. QuantPower lets you see them on the chart and use them in rules.

  • On the chart. Arth charts in QuantPower include the CPR indicator in daily, weekly and monthly versions. It draws the pivot, the top central level and the bottom central level for each period on the chart, calculated from the previous period in Indian time.
  • In signal rules. A signal watches a condition and, when it fires, notifies you or places the order. Conditions can use any chart indicator, including the CPR lines, so a rule such as "15-minute close above the pivot line" can run without you watching the screen. See signal trading.
  • With exits. An algo or a signal can carry a stop-loss, a target and a time exit, so the plan from the worked example runs as written.
  • Before real money. Test pivot rules in backtesting on past candles, then run them in Forward test on live prices.

Charts and the calculator are free. A backtest costs 2 tokens after the first 10 free runs each week, and a live algo costs 200 tokens per 28 days (1 token = ₹1, GST extra). A signal that places its own order costs no tokens.

Start with 500 free tokens

Connect your broker, build a strategy and test it on paper before a single live order goes out.

Common mistakes with pivot points

  • Mixing data sources. Calculating from the index and trading futures, or using one chart's close and another's high, moves every level.
  • Not saying which pivot. Standard, Fibonacci and Camarilla R1 are different prices. Write down which set your rules use.
  • Treating every touch as a signal. With seven to nine levels a day, the price will always be near one of them. A level is useful only if your rules say what to do there.
  • Ignoring the gap. After a large gap, yesterday's levels can be hundreds of points away. Have a rule for gap days, such as waiting 30 minutes or skipping the day.
  • Targets too small for the costs. A 30-point target on Nifty futures is ₹1,950 a lot before charges of roughly ₹950 to ₹1,000. Check the trade after costs.
  • Moving the stop. The levels give a stop before the trade. Moving it further away after entry turns a planned loss into an unplanned one.
  • No test. Trading pivot rules without testing them on past data is trading a belief.

Limits of pivot points

  • They are not predictions. Prices often pass through pivot levels without reacting.
  • They ignore today's news. Results, policy announcements and global moves overnight can make yesterday's levels irrelevant.
  • They describe the past. Every level comes from one period's high, low and close. They say nothing about volume, trend or volatility beyond that.
  • Self-fulfilling only up to a point. Pivots attract orders because many traders watch them. When few traders act on a level, it has no special force.
  • Many levels, many chances. Judge pivots by tested results over many days, not by how often the price touches a level.

Where pivot points are going

Pivot levels have not changed much in forty years, but the way traders use them has. Charting software now draws every variant automatically, so the edge of knowing the levels has gone. What remains is the discipline of planning a day around levels set before the open, and testing that plan. Indian traders increasingly write their pivot rules as conditions that software checks on every candle, and test them on years of data before risking money. With the retail algo framework in force since 1 April 2026, a trader who wants such rules to place orders automatically runs them through a broker under the exchange's rules, with a registered static IP.6

Frequently asked questions

What is the formula for the pivot point?

The pivot is the previous period's high plus its low plus its close, divided by 3. Every support and resistance level is then calculated from the pivot and the previous range, or, for Camarilla levels, from the close and the range.

What is the difference between standard, Fibonacci and Camarilla pivots?

They share the same inputs but place the levels differently. Standard pivots use the previous high and low around the pivot, Fibonacci pivots use 38.2%, 61.8% and 100% of the range, and Camarilla pivots use fractions of 1.1 times the range measured from the close, which gives much tighter levels.

Should I calculate Nifty pivots from the index or from futures?

From the instrument you trade, or the one your options follow. Option traders often use the index; futures traders use the futures. Stay with one source.

Can I use pivot points for weekly or monthly levels?

Yes. Enter the previous week's or month's high, low and close. Weekly and monthly levels are further apart and suit swing and positional trading.

Do pivot levels work after a gap opening?

The levels are still correct, but after a large gap the price may be far from all of them. Many traders wait for the first 30 minutes or skip pivot trades on big gap days.

Can QuantPower trade pivot levels automatically?

Yes. The CPR lines on Arth charts can be used in signal rules, and an algo or signal can carry a stop, a target and a time exit. Test the rules in backtesting and Forward test first.

References

  1. John J. Murphy, *Technical Analysis of the Financial Markets* (New York Institute of Finance, 1999), on floor-trader pivot points
  2. Frank O. Ochoa, *Secrets of a Pivot Boss* (Wiley, 2010), on Camarilla, Woodie and the central pivot range
  3. NSE, closing price of securities: weighted average price of the last 30 minutes (nseindia.com)
  4. NSE, revision of market lot sizes of index derivatives, effective from the contracts after December 2025: Nifty 65, Bank Nifty 30 (nseindia.com)
  5. Union Budget 2026-27: STT on the sale of futures raised from 0.02% to 0.05%, and on the sale of options from 0.10% to 0.15% of the premium, from 1 April 2026 (incometaxindia.gov.in)
  6. SEBI, circular on safer participation of retail investors in algorithmic trading, 4 February 2025, in force for every broker from 1 April 2026 (sebi.gov.in)
The examples on this page are for illustration. Trading involves substantial risk. This tool and guide are for education and are not investment advice.