Register
Report

Best Brokers for Algo Trading in India: API Cost and Brokerage Compared

Choosing a broker for algo trading comes down to four things: whether its API is free, how much market data costs, what the brokerage adds up to over hundreds of orders, and how the broker handles SEBI's rules on static IPs and daily logins. This report compares five widely used brokers QuantPower connects, plus Dhan, on published information checked on 10 October 2026, with Wisdom Capital's brokerage plan as of 11 November 2026.

QuantPower Research · Updated 15 Nov 2026 · 21 min read

Key point
Order APIs are free at every broker here. Market data is where they differ: Zerodha charges ₹500 a month per API key and Dhan ₹499 plus taxes, while Upstox and Fyers include it free. For an active options trader, brokerage of ₹20 per order usually costs more than any API fee.

At a glance

BrokerOrder APIData APIBrokerage modelFits a trader who
ZerodhaFree₹500 a month per API key₹0 on delivery; a fee per executed order on intraday and F&OAlready uses Zerodha and places enough orders to earn the data credit
UpstoxFreeFreeA fee per executed order in every segmentWants free data and a widely used API
FyersFreeFree₹0 on delivery; a fee per executed order on intraday and F&OWants free data, including minute-level history
IIFL CapitalFreeFree₹20 per executed order in every segmentAlready holds an IIFL account
Wisdom CapitalFreeFreeLifetime free brokerage for a one-time fee of ₹1,947: ₹0 in all segmentsPlaces many intraday and F&O orders

The sections below explain each column, then work out what the differences cost at three trading volumes.

How we compared

We looked at each broker's published API pricing, brokerage for F&O and equity, support for the order types algos use, and the daily login and static IP rules under SEBI's framework. We did not measure latency or uptime, which vary by location and time and would need months of logged data to compare fairly. No broker paid to be included.

Every figure below comes from a broker's own pricing or support pages, or from SEBI and NSE documents, on the dates shown. Where a broker offers more than one brokerage plan, the table uses its standard plan, except for Wisdom Capital, where it uses the lifetime free brokerage plan.

How brokerage pricing has changed

Brokerage in India has been priced in four broad ways over the years. Most brokers today use one of the last three, and some offer more than one.

  1. A percentage of turnover. The broker took a share of the value of each trade. A larger trade paid more brokerage, even when it took no more work to place.
  2. A flat fee per executed order. The broker charges a fixed amount, often ₹20, for each order that is filled, whatever its size. A common pattern is ₹0 on delivery and a fee per executed order on intraday and F&O.
  3. Fixed monthly or yearly plans. The client pays a subscription, and brokerage within the plan's terms is covered.
  4. Lifetime free plans with actual zero brokerage. The client pays once, and brokerage is ₹0 on every order in the segments the plan covers.

For an algo trader, the difference matters more than for most. Algos trade mostly intraday and in F&O, and multi-leg strategies with stop losses and re-entries place many orders. Only actual ₹0 on every executed order is true zero brokerage. ₹0 on delivery alone is not zero for an algo trader, whose orders are almost all intraday and F&O.

Zero brokerage is not zero cost. STT, exchange charges, the SEBI fee, stamp duty and GST apply at every broker, whatever the brokerage plan.

API access and market data

BrokerOrder and account APIsLive and historical market dataNotes
Zerodha (Kite Connect)Free (Personal plan)₹500 a month per API keyFrom October 2026, users generating ₹2,000 or more in monthly brokerage get the next month's fee credited
UpstoxFreeFreeAll trading and data APIs free; promotional per-order rates for API trades have applied at times
FyersFreeFreeMinute-level history available through the API
IIFL CapitalFreeFreeOrder and data APIs free for account holders
Wisdom CapitalFreeFreeOrder and data APIs free with your account
Dhan (for reference)Free₹499 a month plus taxesListed here for comparison of data charges

If you use QuantPower as a bridge for your own strategies, live prices come from your broker account, so these data charges apply to you. Zerodha users need the Kite Connect plan to see live prices in QuantPower.

Brokerage

BrokerEquity deliveryEquity intradayFuturesOptions
Zerodha₹0₹20 or 0.03%, whichever is lower₹20 or 0.03%, whichever is lower₹20 per order
Upstox₹20 per order₹20 or 0.1%, whichever is lower₹20 or 0.05%, whichever is lower₹20 per order
Fyers₹0₹20 or 0.03%, whichever is lower₹20 per order₹20 per order
IIFL Capital₹20 per order₹20 per order₹20 per order₹20 per order
Wisdom Capital (lifetime free plan)₹0₹0₹0₹0

Wisdom Capital's lifetime free brokerage plan costs a one-time fee of ₹1,947 and covers all segments with ₹0 brokerage. Festive offers at times reduce the one-time fee. Wisdom Capital also has a separate Pro plan. On it, the cost of QuantPower and of platforms such as Fox Trader, Tradetron and AlgoTest is given back through brokerage reversal. Check Wisdom Capital's own pages for the current terms of each plan.

Statutory charges (STT, exchange charges, SEBI fee, stamp duty and GST) are the same at every broker. Our brokerage calculator works out the full cost of a trade at each broker.

Broker by broker

Each note below covers how API access is set up, the daily login, what data costs and how brokerage is charged. Each broker's own page on this site has the full setup steps.

Zerodha

Zerodha's API is Kite Connect. The free Personal plan covers orders and positions only. Live prices in QuantPower need the paid Kite Connect plan, at ₹500 a month per API key, which includes live and historical market data. From October 2026, users who generate ₹2,000 or more in brokerage in a month get the next month's ₹500 credited.

You register your static IP in your Kite Connect developer account. At Zerodha, only order requests are checked against that IP; prices and positions load from any address. You log in each trading day with your Kite user ID, password and two-factor code.

Brokerage is ₹0 on delivery, ₹20 or 0.03% per executed order (whichever is lower) on intraday and futures, and ₹20 per executed order on options. Zerodha blocks market orders in stock options and in some index option contracts, such as far expiries and deep in-the-money strikes. Zerodha users can also use Streak and Sensibull; they can run alongside QuantPower as long as two platforms never trade the same signal. See Zerodha algo trading.

Upstox

Upstox charges nothing for its order APIs or for live and historical market data. You create your own API app on the developer page, under My Apps, and assign your static IP to it. Upstox allows one active API app per user: creating a new app removes the older ones, so decide which tool uses the app before you create it. You can change the IP once a week.

Each API session needs a login with two-factor authentication and ends before the next trading day. Upstox gives market and SL-M orders market protection by default, which limits how far from the last price they can fill.

Brokerage is ₹20 per order on options, ₹20 or 0.05% (whichever is lower) on futures, ₹20 or 0.1% on intraday, and up to ₹20 per order on delivery. See Upstox API for algo trading.

Fyers

The Fyers API is free, including quotes, market data and historical data. You activate the default app, named Algo trading app, in the Fyers API dashboard. Activation gives a new App ID, ending in 200, and a secret. Fyers accepts orders only from an activated app mapped to a whitelisted static IP; traffic routed through a VPN, proxy or other address is rejected.

Sessions no longer renew through a refresh token, so you complete two-factor authentication once every trading day. Fyers allows at most 10 orders a second, and converts API market orders into market price protection (MPP) orders. Close family members can share one static IP after a declaration and a KYC check.

Brokerage is ₹0 on delivery, ₹20 or 0.03% on intraday, and ₹20 per order on futures and options. See Fyers algo trading.

IIFL Capital

IIFL Securities is now IIFL Capital Services, and API apps are set up on the IIFL Capital developer portal. You sign in as an individual trader, create an app under My Apps and enter your primary static IP in the app form. The IP must match the public address your orders leave from, so a VPN, a proxy or a new router address breaks the match.

IIFL offers its Trading APIs to account holders at no additional cost. API sessions end before the next trading day, and you log in again with two-factor authentication. IIFL can stop algo orders on your account at once, as the framework requires of every broker.

On the standard plan used in this report, brokerage is ₹20 per order in every segment, including delivery. See IIFL algo trading.

Wisdom Capital

Wisdom Capital's order and data APIs are free with your account. The plan used in this report is lifetime free brokerage for a one-time fee of ₹1,947, with ₹0 brokerage in all segments.

QuantPower connects to a Wisdom Capital account the same way as to the other brokers. Under the broker-hosted route, QuantPower runs inside the broker's infrastructure and you need no static IP of your own; under the client-hosted route, you register your own static IP. The same SEBI rules on API keys, daily login and order rates apply. See Wisdom Capital algo trading.

Total monthly cost for an active algo trader

Assume 20 option orders a day for 22 trading days, or 440 orders a month, with live market data needed.

BrokerBrokerageData APITotal before GST and statutory charges
Zerodha₹8,800₹500 (often credited back at this volume)₹8,800 to ₹9,300
Upstox₹8,800₹0₹8,800
Fyers₹8,800₹0₹8,800
IIFL Capital₹8,800₹0₹8,800
Wisdom Capital (lifetime free plan)₹0₹0₹0 (after the one-time ₹1,947 plan fee)

At this volume, brokerage dwarfs the data fee. At low volumes, the ₹500 or ₹499 data fee becomes a larger share of costs.

How the cost example is worked out

The example uses round numbers so you can redo it for your own strategy.

  • Orders. 20 option orders a day for 22 trading days is 440 orders a month. A two-leg strategy that enters and exits once a day places four orders, so 20 orders a day is about five such strategies.
  • Brokerage. At ₹20 per executed order, 440 orders cost ₹8,800. At ₹0 per order, they cost nothing.
  • Data. Add the broker's data fee if it charges one. At Zerodha, a trader whose brokerage reaches ₹2,000 in a month gets the next month's ₹500 credited, so at this volume the fee is often returned.
  • GST. GST at 18% is added to brokerage, so ₹8,800 of brokerage carries ₹1,584 of GST, for ₹10,384 in all.
  • Statutory charges. STT, exchange charges, the SEBI fee and stamp duty depend on the premium and the side of each trade, not on the broker. Leave them out when you compare brokers, and add them back when you work out your real cost.
  • One-time fees. Wisdom Capital's ₹1,947 is paid once, not each month. It equals about 97 orders at ₹20 each.

At a lower volume the picture changes. Two option orders a day for 22 days is 44 orders, or ₹880 of brokerage at ₹20 an order. There, a ₹500 data fee is more than half as large as the brokerage.

Cost at three trading volumes

The 440-order example above is one point on a range. The table below repeats it for a light trader and a heavy one, so you can see where the data fee matters and where brokerage takes over. Each month is 22 trading days, and every order is an option order.

2 orders a day20 orders a day60 orders a day
Orders a month444401,320
Brokerage at ₹20 per order₹880₹8,800₹26,400
GST at 18% on brokerage₹158.40₹1,584₹4,752
Zerodha data fee₹500₹500 (credited next month)₹500 (credited next month)
Total at Zerodha₹1,538.40₹10,884₹31,652
Total at Upstox, Fyers or IIFL Capital₹1,038.40₹10,384₹31,152
Total at Wisdom Capital (lifetime free plan)₹0₹0₹0

The arithmetic for each column:

  • 2 orders a day. 2 × 22 = 44 orders. 44 × ₹20 = ₹880 of brokerage, and 18% of ₹880 is ₹158.40 of GST. At Zerodha, ₹880 is below the ₹2,000 threshold, so the ₹500 data fee is not credited.
  • 20 orders a day. 20 × 22 = 440 orders. 440 × ₹20 = ₹8,800, and 18% of that is ₹1,584. Brokerage is above ₹2,000, so Zerodha credits the next month's ₹500.
  • 60 orders a day. 60 × 22 = 1,320 orders. 1,320 × ₹20 = ₹26,400, and 18% of that is ₹4,752. The data fee is again credited the next month.

Statutory charges are left out of every column, because they are the same at each broker. The Wisdom Capital row also leaves out the one-time ₹1,947 plan fee. At 2 orders a day, that fee equals a little over two months of brokerage at ₹20 an order. At 60 orders a day, it equals less than two days of brokerage.

Two things follow. At low volume, the data fee is the largest difference between brokers on the ₹20 model: ₹500 next to ₹880 of brokerage. At high volume, the per-order fee is the largest cost by far, and the data fee hardly moves the total.

Statutory charges, and why they do not change the comparison

Five charges apply to every trade on top of brokerage. They are set by the government, the exchanges and SEBI, not by the broker.

  • STT (securities transaction tax). 0.15% of the sell premium on options and 0.05% of the sell value on futures, from 1 April 2026.
  • Exchange transaction charges. On NSE, 0.03553% of premium turnover on options and 0.00183% of turnover on futures.
  • SEBI fee. ₹10 per crore of turnover.
  • Stamp duty. 0.003% of the buy premium on options and 0.002% of the buy value on futures.
  • GST. 18% of brokerage, transaction charges and the SEBI fee.

Because these rates are the same everywhere, the gap between two brokers is only their brokerage and the GST on it. Take the one-lot Nifty option round trip from our brokerage calculator: 65 units bought at ₹100 and sold at ₹110 on NSE. At a ₹20-per-order broker, total charges are ₹63.86. At ₹0 brokerage, they are ₹16.66. The difference, ₹47.20, is ₹40 of brokerage plus ₹7.20 of GST on it.

In futures the picture is different. A one-lot Nifty futures round trip, bought at 25,000 and sold at 25,050, costs ₹967.91 at a ₹20-per-order broker and ₹920.71 at ₹0 brokerage. STT alone is ₹814.13. The broker's share is the same ₹47.20, but next to STT it is small. So the brokerage plan matters most to an options algo, and least to a futures algo.

GST is the one statutory item that moves with the broker, because part of it is charged on brokerage. At ₹0 brokerage, there is no GST on brokerage either.

Costs that are easy to miss

Brokerage and data fees are on every broker's pricing page. These costs are not always next to them, and each one can change which broker is cheaper for you.

  • Market data through the API. Zerodha charges ₹500 a month per API key, and Dhan ₹499 a month plus taxes. If you run two API keys, you pay twice.
  • Slices of a large order. Each slice of an iceberg order is a separate order. At ₹20 per order, an order split into five legs costs five brokerage fees. An order above the exchange's freeze quantity has to be split.
  • Multi-leg strategies. An iron condor has four legs, so opening and closing it takes eight orders: ₹160 of brokerage at ₹20 per order.
  • A static IP. For client-hosted execution you need a fixed IP from your internet provider or a VPS, which you pay for separately. Broker-hosted execution does not need one.
  • DP charges. Selling shares from your demat account costs a DP charge per company per day. At Zerodha it is ₹15.34 including GST. This affects delivery strategies, not intraday or F&O.
  • Auto square-off fees. Many brokers charge a fixed fee plus GST for each intraday position they close at their cut-off time. A time exit in your strategy, before the broker's cut-off, avoids it. See square off meaning.
  • Call and trade fees for orders you place by phone through the broker's dealing desk.
  • Account maintenance charges for the demat account, charged yearly or quarterly.
  • Interest on margin trading or on a debit balance.
  • Exercised options. Check whether your broker charges a fee on contracts that are exercised at expiry.

What to check in a broker's API

The rules below come from SEBI's framework for retail algo trading, which every broker has applied since 1 April 2026. Our page on broker connection requirements explains each one in detail.

  • Your own API key. There are no open APIs. Each client uses an API key issued to them, with a matching secret, created on the broker's API or developer page.
  • A registered static IP. API orders must come from a static IP registered with your broker. You register one primary IP and may add a backup. Exchange rules allow one change a calendar week, except in an emergency. A spouse, dependent children and dependent parents may share the IP, with the broker's approval.
  • Broker-hosted or client-hosted. QuantPower runs inside the broker's infrastructure, where the client needs no static IP of their own, or with the client's own static IP.
  • Daily login. Every broker ends API sessions before the next trading day. You log in each morning on the broker's own page with two-factor authentication. A strategy scheduled before you log in will not place its orders.
  • Order-rate limits. Your own algos must send fewer than 10 orders a second. Faster algos must be registered through the broker and carry an Algo ID. Brokers can also set their own caps per second, per minute and per day, and on how often one order can be modified.
  • Segments. F&O and the commodity segment for MCX are separate activations. Ask for both well before the day you plan to start.
  • Market data. Check whether live and historical prices through the API cost extra, and how much history the API returns.

Order types and rules that matter for algos

FeatureWhat to checkWhy it matters
SL-M in optionsNot available at any broker: NSE discontinued it in 2021Use SL orders with a buffer
Market orders in optionsBlocked or protected at several brokers in stock options and illiquid strikesUse marketable limit orders
Freeze quantityExchange limit per order; brokers may offer slicingIceberg orders split large orders
Order rate limitsBrokers cap orders per second; SEBI's threshold for unregistered algos is 10 a secondSpace out multi-leg entries
Static IPRequired for your own API orders at every broker under SEBI's rules; changeable once a weekNeeded only when you run your own code
Daily loginEvery broker ends API sessions before the next trading dayLog in each morning before strategies start

Our guides to order types and SEBI's algo trading rules cover these in detail.

Moving your algos to a new broker: step by step

Your strategies are rules you build in QuantPower, so moving them is mostly a question of getting the new account ready. Work through these steps in order, and allow time for the account and segment activations.

  1. Open the account and complete KYC.
  2. Activate the segments you trade. F&O needs proof of income or net worth, such as a bank statement, salary slip or ITR, and your acceptance of SEBI's risk disclosure on derivatives. The commodity segment for MCX is a separate activation.
  3. Check the data plan. Find out whether live prices through the API cost extra, and subscribe if they do. At Zerodha, live prices in QuantPower need the paid Kite Connect plan.
  4. Create your API key or app on the broker's API or developer page, and keep the secret like a password.
  5. Choose the route. For client-hosted execution, register the static IP of the computer or VPS that will send your orders. For broker-hosted execution, no static IP of your own is needed.
  6. Connect the broker in QuantPower. Open broker settings, choose the broker, and log in on its own page with two-factor authentication. Check that your funds, holdings and positions appear.
  7. Check order types. Replace any SL-M orders in options with SL orders and a buffer, and check how the broker treats market orders from an API.
  8. Run each strategy in a [forward test](/forward-test) on the new account before it trades with real money.
  9. Go live with a small size, then scale up once the orders, fills and stop losses behave as expected.
  10. Log in every trading morning before your first strategy starts. A strategy scheduled before you log in will not place its orders.

Turn off the strategy on the old account before you switch it on at the new one, so the same signal does not trade twice. Our trading automation checklist covers the checks to run before any strategy goes live.

Common mistakes when choosing a broker for algo trading

  • Comparing delivery brokerage only. ₹0 on delivery says little about an algo's costs, because algo orders are almost all intraday and F&O.
  • Counting trades instead of orders. A round trip is two executed orders, and a two-leg strategy that enters and exits once a day places four. Brokerage is charged on each.
  • Ignoring the data fee at low volume. At 2 orders a day, a ₹500 data fee is more than half the brokerage.
  • Leaving out GST. GST at 18% applies to brokerage, so ₹8,800 of brokerage costs ₹10,384.
  • Using SL-M orders in options. NSE discontinued them in 2021, so they are rejected. Use SL orders with a buffer.
  • Relying on market orders in options. Several brokers block or protect market orders in stock options and illiquid strikes. Use marketable limit orders.
  • Letting the IP change. If your internet provider changes your address, client-hosted orders are blocked until you register the new one, and exchange rules allow one change a calendar week, except in an emergency.
  • Running two platforms on one signal. If two tools trade the same strategy on the same account, your positions double.
  • Replacing an API app by accident. At Upstox, creating a new app removes the old one, which stops any other tool that used it.
  • Sending multi-leg entries at once. Space the legs so your account stays under 10 orders a second.

Which broker for which trader

If youConsider
Trade options actively and want the lowest brokerageCompare brokers in the brokerage calculator
Place many intraday and F&O orders and want actual ₹0 brokerageWisdom Capital's lifetime free plan (one-time ₹1,947)
Want free data and a widely used APIUpstox or Fyers
Already use Zerodha and trade enough to earn the data creditZerodha

With any of the 100+ brokers it connects, QuantPower works as a bridge for your own strategies through the broker's official API. For further details, please contact us.

Terms used in this report

  • API key: a unique key, with a matching secret, issued to you by your broker for API access. Under SEBI's framework there are no open APIs. See trading API basics.
  • Static IP: the fixed public address of the computer or VPS that sends your orders, registered with your broker for client-hosted execution. See broker connection requirements.
  • Executed order: an order that is filled, in full or in part. At most brokers, an order that fills in several parts on the same day is charged as one; a rejected order, or one cancelled before any part fills, costs no brokerage.
  • Round trip: one buy and one sell, so two executed orders.
  • Freeze quantity: the exchange's maximum quantity for a single order in an F&O contract. From 5 October 2026, it is 3,510 units for Nifty and 1,440 for Bank Nifty on NSE. See iceberg orders.
  • SL-M: a stop-loss market order, which sends a market order when the trigger is hit. Not allowed in options on NSE since 27 September 2021. See order types.
  • Algo ID: an exchange-assigned ID carried by every order from a registered algo. Algos that send 10 or more orders a second must be registered and carry one. See SEBI's algo trading rules.
  • Auto square-off: the broker closing your open intraday positions at its cut-off time. See square off meaning.

The trading glossary defines more terms.

Start with 500 free tokens

Connect your broker, build a strategy and test it on paper before a single live order goes out.

Frequently asked questions

Which broker has the cheapest API for algo trading?

Order APIs are free at all the brokers here. For market data, Upstox, Fyers, IIFL Capital and Wisdom Capital are free; Zerodha charges ₹500 a month per API key and Dhan ₹499 plus taxes.

Do I need my own API plan to use QuantPower?

Live prices in QuantPower come from your broker account. Zerodha users need Zerodha's Kite Connect plan; at Upstox and Fyers the data is free.

Which broker is fastest for algo orders?

We did not measure latency or uptime, so this report does not rank brokers on speed. Every broker here routes orders through its own risk checks to the exchange.

Can I connect more than one broker to QuantPower?

Yes. Each broker account connects and logs in separately, on the broker's own page. See broker connection requirements.

What counts as true zero brokerage?

Only actual ₹0 brokerage on every executed order in the segments you trade. A plan with ₹0 on delivery and a fee per executed order on intraday and F&O is not zero for an algo trader, because nearly all algo orders are intraday or F&O.

Does zero brokerage mean a trade costs nothing?

No. STT, exchange charges, the SEBI fee, stamp duty and GST still apply. In futures, STT is most of the cost: on a round trip of one Nifty futures lot, it is ₹814.13 of the ₹967.91 total at a ₹20-per-order broker. The brokerage calculator shows the full breakdown.

Do I need a static IP for algo trading?

Only if you run your own code or use client-hosted execution. Where QuantPower runs inside the broker's infrastructure, you do not need a static IP of your own. Orders you place by hand in your broker's app need no registered IP.

Does QuantPower charge brokerage?

No. QuantPower is trading software, not a broker. Your broker charges brokerage. QuantPower is pay per use with tokens (1 token = ₹1, GST extra): a live algo costs 200 tokens per 28 days, and charts, the option chain, the screener and the strategy builder are free. See pricing.

Is brokerage charged on each leg of a multi-leg strategy?

Yes. Each leg is a separate order. A short straddle sends two orders at entry and two at exit, and an iron condor four and four, so a condor round trip costs eight brokerage fees on a per-order plan.

Do I pay brokerage on rejected or cancelled orders?

No. A rejected order, or one cancelled before any part fills, costs no brokerage. At most brokers, an order that fills in several parts on the same day is charged as one executed order.

Is GST charged on brokerage?

Yes. GST at 18% is charged on brokerage, exchange transaction charges and the SEBI fee. On ₹8,800 of brokerage, GST is ₹1,584.

Can I move my strategies to a new broker?

Yes. Connect the new broker in QuantPower, check that it accepts the order types your strategies use, and run each strategy in a forward test on the new account first. Switch the strategy off on the old account so the same signal does not trade twice.

What happens if I forget the daily login?

Your strategies do not place orders until you log in. Every broker ends API sessions before the next trading day, so log in each morning before your first strategy is due to start.

Sources

  • Broker API pricing pages and support articles: Zerodha Kite Connect, Upstox Developer API, Fyers API, DhanHQ (checked 10 October 2026)
  • Broker brokerage pages and third-party rate listings (checked 10 October 2026)
  • Wisdom Capital: lifetime free brokerage plan and Pro plan, as stated by Wisdom Capital (11 November 2026)
  • SEBI, circular on safer participation of retail investors in algorithmic trading, 4 February 2025; NSE implementation standards, May 2025
Broker names are trademarks of their owners. Charges change; check each broker's current pages before you decide. Trading involves substantial risk, and this report is not investment advice.