The real choice is about who runs the software. With OpenAlgo you do: you pick the server, install it, apply updates, keep it secure, arrange the static IP and keep it online through market hours, and in return you own and control every part. With QuantPower the running is done for you, with two static IPs included. This page compares the two on each product's own pages, checked on 15 November 2026, and helps you decide which model fits you. It does not rank performance and shows no returns.
QuantPower vs OpenAlgo at a glance
| OpenAlgo | QuantPower | |
|---|---|---|
| What it is | Open-source software you host: "the open source trading ecosystem for everyone" | Ready-to-use trading software, with nothing to install |
| Licence and cost | Free under AGPL-3.0; you pay for your server and your time | Pay per use in tokens: a live algo 200 tokens per 28 days |
| Who runs it | You: install, update, secure and keep it online | QuantPower |
| Brokers | Broker plugins you set up on your installation | 100+ Indian brokers through their official APIs |
| Brokers at once | One trader and one active broker session per installation | Several brokers connected at once, with a broker picker on the order sheet |
| Strategy building | Flow, a no-code canvas; hosted Python strategies | Option bots, signal algos and webhooks; Quanty builds from your words |
| Testing | A sandbox (Analyzer mode) on live data with sandbox capital | Rule and option strategy backtests, and Forward test on live prices |
| Charts | A chart terminal with up to eight charts | Arth.live charts, up to 16 on one screen, with order, position and GTT lines |
| Scalping | A keyboard-driven scalping terminal with server-side stops | The Scalper: call and put charts side by side |
| AI | An AI agent and an MCP server; proposed orders wait for your approval | Quanty, and Connect AI for your own AI app; prepared orders wait for your tap |
| Static IP | From your own server or internet provider | 2 static IPs free, a primary and a backup |
A short history of open-source trading software
Open-source trading software is older than most retail algo platforms. In the early 2010s, research platforms such as Zipline, released as open source by Quantopian, and later Backtrader gave anyone with Python a backtesting engine they could read and change. They were research tools first: they tested ideas on past data, and sending real orders was left to the user.1
In India, the missing piece was the broker connection. Each broker that opened a trading API in the late 2010s did it in its own way, with its own login, its own symbols and its own order format. A coder who wanted to switch brokers had to rewrite the trading layer. OpenAlgo set out to solve that with one API across many brokers, then grew into a full platform with a no-code builder, terminals, options tools and AI.2
The rules changed in 2025. SEBI's circular of 4 February 2025 on safer participation of retail investors in algorithmic trading, in force for every broker from 1 April 2026, made the broker answer for every algo order and tied API orders to a static IP registered with the broker.3 A client running their own code can still trade without registering the algo if they stay within 10 orders a second, from a registered static IP. For self-hosted software, that makes the server's IP and its reliability part of compliance, not only of convenience.
What OpenAlgo is
OpenAlgo calls itself "the open source trading ecosystem for everyone". Its documentation describes a self-hosted platform, built with Python Flask and a React front end, that combines charting, scalping, options analytics, strategy automation, risk management, sandbox testing and market-data research, with one API across its broker plugins.2
Its documented features include:
- Flow, a no-code, drag-and-drop strategy canvas.
- Python strategies, hosted as separate processes on an exchange-aware schedule, with live logs.
- Webhook signals from AmiBroker, ChartInk, GoCharting, MetaTrader 5, N8N, Excel and Google Sheets.
- A chart terminal with up to eight charts in a 4×2 grid, indicators, drawings and order entry.
- A scalping terminal, keyboard-driven, with server-side stops, targets and trailing that keep working after the browser is closed.
- Options tools: option chains, Greeks, OI and volatility views.
- A sandbox (Analyzer mode) that runs strategies on live market data with sandbox capital, isolated from your real account.
- An AI agent and an MCP server: the agent reads market data and proposes orders, and "every order it proposes waits for your approval".
It runs on a local machine, a VPS or a cloud server. Each installation supports one trader and one active broker session, and the documentation lists Python 3.12 or newer, 2 GB of memory and 2 GB of storage as the minimum, with more storage recommended for historical data.
What QuantPower is
QuantPower is trading software from Wisdom Tree Ventures, Noida. It connects to 100+ Indian brokers through their official APIs, covers NSE and BSE cash and F&O, commodity and currency, and keeps your funds and positions in your own broker account.4 There is nothing to install; you use it in a browser or the phone app, and nothing needs to stay switched on at your end while your algos run.
The same app holds Charts by Arth.live, the option chain with OI, IV, Greeks and the expected move, a trading terminal with positions, holdings, funds, GTT orders, baskets and stock SIP, trading from the chart and the Scalper, algos in four tabs (Option bots, Signal algos, Webhooks and M2M), backtests and Forward test, Quanty AI and Connect AI. It is software, not a broker or an adviser.
Running it: the main difference
Most of the comparison comes down to this table.
| Job | OpenAlgo | QuantPower |
|---|---|---|
| Choose and pay for a server | You | Done |
| Install and configure | You | Done |
| Apply updates | You | Done |
| Keep it secure | You: passwords, keys, firewall, backups | Encrypted keys, HttpOnly cookies, a second factor for sensitive actions, daily backups |
| Keep it online in market hours | You | Done |
| Arrange the static IP | You, through the server or internet provider | 2 static IPs free, a primary and a backup |
| Fix it when it breaks at 9:20 am | You | QuantPower |
For a coder who enjoys running servers, the left column is part of the appeal: everything is visible and changeable, and nothing depends on a vendor. For a trader who would rather spend the morning on the market, the left column is work. Neither is wrong; it is a question of how you want to spend your time.
The cost of the left column is easy to underestimate. A server that is cheap per month still needs an hour here and there: a broker changes its login flow, an operating system update needs a restart, a disk fills with logs, a certificate expires. Each is small; together they are a part-time job that falls on the trader, often at the least convenient moment. The right column moves that job to the vendor, in exchange for a fee per use. Write down how many hours a month the left column would take you, and put a value on them, before you decide which is cheaper.
Building strategies compared
OpenAlgo offers Flow for no-code strategies and hosted Python for coded ones. A coder can write any logic Python can express, and the same API serves every broker plugin.
QuantPower builds strategies without code in three places:
- Option bots for leg-based strategies: templates such as Short Straddle, Iron Condor or Jade Lizard, or your own legs; rule legs that pick a strike at each entry by moneyness, premium, a Greek or the straddle; entry at a time, on a move, or on an opening range breakout; exits on each leg and on the whole strategy.
- Signal algos for conditions, the core of QuantPower's signal trading: up to 20 conditions on the chart's indicators, candle patterns and chart formations, checked on closed candles; one-touch or auto.
- Webhooks for your own code or tools: any program that can call a URL starts and stops your algos, so a Python script or a spreadsheet can trigger a QuantPower algo without running its own broker connection.
Quanty can also build a strategy from your words for you to check, and Arth Script lets you write your own indicators as short formulas.
Testing compared
OpenAlgo runs strategies in its sandbox, Analyzer mode, on live market data with sandbox capital, isolated from your real account.
QuantPower has three steps. A rule backtest tests a condition on one instrument over up to 2,000 of your broker's candles. An option strategy backtest checks each leg every minute over past days, with costs and an unseen-days check on the last 30% of the period; the backtesting page explains the method. Then forward test runs the strategy on live prices with test money, by algo for 100 tokens per 28 days or by hand on a free Forward-test account that starts with ₹10,00,000. Backtests cost 2 tokens a run, with the first 10 each week free.
Charts, scalping and options tools
Both products now include charting and scalping screens alongside automation.
| Tool | OpenAlgo | QuantPower |
|---|---|---|
| Charts | Up to eight charts in a 4×2 grid, with indicators, drawings and order entry | Arth.live: 201 indicators, 19 chart types, 89 drawing tools, up to 16 charts; order, position and GTT lines on the chart |
| Scalping | Keyboard-driven terminal; stops, targets and trailing kept on the server | The Scalper: call and put charts side by side, a strike stepper, the margin shown, the kill switch at hand |
| Options | Option chains, Greeks, OI and volatility tools | Option chain with OI, IV, Greeks, the expected move and futures buildup labels |
| Holdings and funds | Through the broker connection | Positions, holdings with pledging, funds and collateral, GTT, baskets, stock SIP |
AI compared
Both products treat AI the same careful way: the AI can propose, and you decide.
OpenAlgo has an AI agent that reads market data and proposes orders, each waiting for your approval, and an MCP server that connects assistants such as Claude and ChatGPT to your account.
QuantPower has Quanty in the app, which answers questions, explains rules and builds strategies by text or voice, and saves what it builds switched off. Connect AI is one MCP server that links Claude, ChatGPT or any MCP-ready AI app to your account with the permissions you grant; a connected AI can read your account, backtest your rules and prepare an order, which waits as a card in your app until you confirm it with a tap and your second factor. No AI tool places, changes or cancels an order, or switches an algo on.
Risk controls
OpenAlgo's documentation lists risk management among its features and keeps scalping stops on the server.
QuantPower puts three account controls above every algo and every connected broker: Smart Exit (a profit target, a stop and a trailing step for the whole account, which stops the algos and squares off on a hit), a daily loss limit that refuses new orders once reached, and a kill switch that stops chosen segments until their next session. If a broker does not answer, risk checks refuse the order rather than assume there is no position.
Security compared
Trading software holds the keys to your broker account, so where those keys live matters.
With OpenAlgo, they live on your own installation. That gives you full control, and it makes their safety your job: a strong password, a patched operating system, a firewall, encrypted backups, and care with who can reach the server. Its documentation covers how to set up the software; the security of the machine underneath is yours.
With QuantPower, they live on QuantPower's servers. Broker keys and tokens are stored encrypted and never shown again after you enter them; in Admin they appear masked. Your session uses HttpOnly cookies that page code cannot read, with silent refresh and theft detection on the refresh cookie. A second factor, from an authenticator app or SMS where enabled, is asked at login if you set one, and again for sensitive actions such as exiting all positions, setting the kill switch, confirming a prepared order or connecting an AI app; five wrong answers lock that action for 15 minutes. Each sign-in is a device you can see and log out from Settings. The database is backed up daily, with backups kept for 14 days.
What happens on a bad day
Every system meets a bad morning: a broker outage, a network drop, a server that does not come back after a restart. The difference is who handles it.
| Event | Self-hosted (OpenAlgo) | QuantPower |
|---|---|---|
| Your home internet or power fails | A home server stops; a cloud server keeps running | Nothing changes; your algos keep running |
| The server needs a restart or an update | You do it, ideally outside market hours | Done for you |
| The static IP path fails | Orders fail or go from the wrong address unless you planned for it | Orders are held, never sent from another address |
| The broker does not answer | Depends on your setup and the plugin | Orders are refused, never assumed; nothing is treated as "no position" |
| An exit order is refused | Depends on your strategy code | Retried up to 8 times with a growing gap; the card shows what is still owed |
Questions to ask yourself before self-hosting
Self-hosting is a good choice for many coders. Before you choose it for live trading, answer these honestly:
- Where will it run? A home computer is cheap but depends on your power and internet. A cloud server is steadier but costs money every month.
- Who updates it? Broker APIs change their login flows and order formats. Someone has to apply the updates before the next session, not during it.
- Who secures it? The server holds your broker keys. Patches, passwords, firewall rules and backups are yours.
- How will you get the static IP? A cloud server usually has one; a home connection may need your internet provider to sell you one. Either way, register it with your broker.
- What is your plan at 9:20 am when it does not respond? Write it down before you need it: how you will reach the server, how you will close positions at the broker if you cannot.
- How much time will it take each month? Count it honestly, and put a value on it.
If those answers suit you, self-hosted software gives you control no vendor can match. If they read like work you would rather not do, a ready-to-use platform is the better fit.
How each charges
OpenAlgo: the software is free under the AGPL-3.0 licence. You pay for the server, any static IP your provider charges for, market data where your broker charges for it, AI usage on your own AI account, and your own time.
QuantPower: pay per use in tokens, with no monthly plan.
| Action | Tokens (1 token = ₹1, GST extra) |
|---|---|
| Live algo | 200 per algo per 28 days, orders unlimited |
| Forward test algo | 100 per algo per 28 days |
| Backtest | 2 a run; the first 10 each week free |
| Quanty question | 1; the first 5 each day free |
| Signal that places its own order | Free |
| Charts, option chain, screener, strategy builder, two static IPs | Free |
See QuantPower pricing for the full list. Brokerage and statutory charges are the same on both.
Where OpenAlgo is stronger
- Control and ownership. You run the code, you can read and change every part, and nothing depends on a vendor.
- No software fee. The licence is free; your costs are the server and your time.
- Python freedom. Hosted Python strategies can express any logic a coder can write.
- A wide range of signal sources. Its webhooks take signals from charting software such as AmiBroker, ChartInk and MetaTrader 5, and from N8N, Excel, Google Sheets and more.
- An active open-source project, developed in public.
Where QuantPower is stronger
- Nothing to run. No server to choose, install, update, secure or keep online.
- Static IP included. 2 static IPs free with every account, a primary and a backup, held rather than rerouted if the proxy is down.
- Several brokers at once. Connect more than one broker; the order sheet asks which, and the risk controls add up every broker together.
- Testing on past option prices with costs. Option strategy backtests checked minute by minute, then Forward test.
- Account-level risk. Smart Exit, the daily loss limit and the kill switch above every algo.
- One app for trading as well as algos. Holdings, funds, GTT orders, baskets, stock SIP and trading from the chart in the same place.
A worked example: a Python coder
A trader writes strategies in Python and runs them on a laptop today.
- With OpenAlgo, the trader hosts the scripts on an OpenAlgo server, uses its one API for the broker, registers the server's static IP with the broker, and keeps the server running.
- With QuantPower, the trader keeps the Python logic but lets QuantPower carry the orders: the script calls a QuantPower webhook URL when it wants an entry or an exit, and the webhook starts or stops an Option bot that holds the legs, the stops and the exit time. The orders go from QuantPower's two static IPs; the script needs no broker connection, and the account's Smart Exit and loss limit sit above it. Up to 20 webhooks are available, each linked to up to 10 algos.
Either way, the coder must stay within the rule for self-built strategies: no more than 10 orders a second unless the algo is registered with the exchange. The webhook route also changes what the coder has to maintain. The script still needs to run somewhere to decide when to call the URL, but it no longer has to hold broker keys, renew the daily broker session, track open positions or handle refused orders; the Option bot does those jobs, and its activity log records each entry, exit and refusal in plain words.
A worked example: a chart alert user
A second trader buys Nifty options when an alert from his charting software fires and wants it automated without running a server.
- With OpenAlgo, the alert goes to the OpenAlgo webhook on the trader's own server, which places the order through the broker plugin.
- With QuantPower, the alert goes to a QuantPower webhook linked to an Option bot. Or the trader moves the chart to free Arth.live charts and links the alert straight to a webhook signal, so the chart, the alert and the order are in one app. A signal that places its own order costs no tokens; an algo it starts costs 200 tokens per 28 days.
Who each suits
OpenAlgo suits a trader who codes, likes to see and change how every part works, already runs or is happy to run a server, and wants no software fee. It also suits developers building their own tools on one broker API, and traders who want their whole setup under their own control.
QuantPower suits a trader who wants to spend the session on the market rather than on a server, wants the chart, the terminal and the algos in one place, runs leg-based option strategies without code, connects more than one broker, and wants the static IP and the account-level limits handled for them.
Many traders sit between the two. A coder may want Python for research and signals but not want to maintain the trading layer; a no-code trader may want one or two custom signals from a script. Webhooks make that middle ground workable: the logic lives where the trader likes to write it, and the orders go through the platform that runs the account.
Using OpenAlgo and QuantPower together
The two can share a workflow without sharing an account's strategies. A trader can research and sandbox an idea in OpenAlgo, then send the live signal to a QuantPower webhook that starts an Option bot, so the orders go from QuantPower's static IPs under its Smart Exit and loss limit. Two rules apply: never run the same strategy live on both, and set loss limits on each, because each platform's limits see only its own orders.
Moving between the two
From OpenAlgo to QuantPower:
- List each strategy, its signal source and its broker.
- Connect the broker in QuantPower and register the two static IPs the Brokers screen shows.
- Rebuild leg-based strategies as Option bots and condition-based ones as signal algos; point outside tools at QuantPower webhooks.
- Backtest, then run in Forward test.
- Stop the OpenAlgo strategy before switching the QuantPower algo on Live.
From QuantPower to OpenAlgo, reverse the order, and set up the server, the static IP and the broker plugin first. Whichever way you move, keep the old setup running only in test mode until the new one has handled a few full sessions, including an expiry day.
Where trading software is going
Two models are growing side by side. Open-source platforms give traders full control and no software fee, and they now include terminals, analytics and AI that only commercial products had a few years ago. Ready-to-use platforms remove the running of software and bundle what the rules now require, such as the static IP. AI is spreading through both, with the same safeguard: the AI proposes and the trader confirms.
How we compared
We read OpenAlgo's documentation on 15 November 2026 and compared it with QuantPower's code and documentation on the same day. We compared what each states about running the software, brokers, strategy building, testing, charts, AI, risk controls, the static IP and cost. A feature in documentation does not prove that a given installation, account or broker is set up and working. We did not measure speed or live performance, and no product paid to be included. Nothing on this page is investment advice.
Start with 500 free tokens
Connect your broker, build a strategy and test it on paper before a single live order goes out.
Frequently asked questions
Do I need a server to use OpenAlgo?
Yes. OpenAlgo is self-hosted: it runs on your own computer, a VPS or a cloud server, and that machine must stay on and online through the trading session. With QuantPower, algos keep running when your phone or computer is off, so nothing needs to stay on at your end.
Is OpenAlgo really free?
The software is free under the AGPL-3.0 licence. Running it is not: you pay for the server, any static IP your provider charges for, any broker data fees, any AI usage, and the time to keep it updated and secure.
Can I send orders from my own Python code through QuantPower?
Yes, through webhooks. Your code calls a QuantPower webhook URL to start or stop an Option bot, and the order goes from QuantPower's static IPs with the account's risk controls above it.
Which is safer to run unattended?
Both keep a human in the loop for AI orders. For unattended algos, ask what happens when the server, the broker or the network fails. QuantPower holds orders if its static IP proxy is down, retries refused exits up to 8 times, and refuses orders when a broker does not answer; with self-hosted software, the answer depends on how you set up your server.
Related comparisons
- Best algo trading software in India: eight products, including OpenAlgo, compared
- Best AI algo trading software in India: AI features compared
- AlgoTest vs QuantPower: a backtesting-led platform
References
- Quantopian, Zipline open-source backtesting library (github.com/quantopian/zipline)
- OpenAlgo: its documentation (docs.openalgo.in) and its public code repository (checked 15 November 2026)
- SEBI, circular on safer participation of retail investors in algorithmic trading, 4 February 2025, in force for every broker from 1 April 2026 (sebi.gov.in)
- QuantPower: product, algo and price documentation, checked 15 November 2026