Register
Product

Live Technical Indicator & Price Action Market Scanner

QuantPower's market scanners search NSE stocks, index options and MCX commodities for setups as they happen: the day's top gainers and losers, gaps at the open, opening range breakouts, volume spikes, RSI extremes, moving-average crosses, Supertrend flips, open interest buildups and stocks near their 52-week high or low. This page explains the ready-made scans, how to build your own, and how to turn what you find into alerts and strategies.

QuantPower Research · Updated 12 Nov 2026 · 20 min read

A scanner checks many shares against the same conditions and lists the ones that match. Instead of opening chart after chart, you see in one list which stocks opened well above yesterday's close, which have an RSI below 30 and which crossed above their 50-day average today. QuantPower runs ready-made scans in three groups, Intraday, Technical and Open interest, over the set of instruments you choose, on 5-minute, 15-minute, hourly or daily candles, and lets you build and save your own scans of up to five conditions, or describe one in words and let Quanty write it. Scanning is free. A scan only lists instruments: it never places an order, and what you do with a result is your decision.

What QuantPower's scanner does

PartWhat it does
UniverseYour choice: Nifty 50, Nifty 500, the F&O stocks, index options, MCX commodities or your own watchlist
Intraday scansReady-made scans on today's prices: gainers, losers, most active, volume spikes, gaps, opening range breakouts, Open = High, Open = Low, under ₹100
Technical scansReady-made scans: RSI extremes, 200-day average, 20 and 50 EMA crosses, Supertrend flips, 52-week highs and lows
Open interest scansFutures long buildup, short buildup, short covering and long unwinding; the option strikes with the largest change in open interest
Candles5-minute, 15-minute, hourly or daily
Your own scans1 to 5 conditions on price, simple and exponential averages, RSI and the MACD histogram; every condition must hold; or described in words for Quanty to write
Saved scansUp to 20, run again with one tap
ResultsUp to 50 stocks, sorted by how strongly each matches, with the price, the day's change and a short note
From a resultOne tap opens the stock: chart, option chain, buy, sell or add to a watchlist
DataLive prices, open interest and past candles from your connected broker
PriceFree: no tokens

A short history of stock scanning

Traders have always searched for the few stocks worth a closer look among the many on the board. On the floor of a stock exchange that search was done by eye, from the ticker tape and the price boards. In the early twentieth century, writers such as Richard Wyckoff taught traders to read the tape for stocks that moved on rising volume, which is the same idea as a volume scan today.1

Printed screens came next. Newspapers printed the day's most active shares and the biggest gainers and losers, and from 1984 Investor's Business Daily printed lists of stocks making new highs, ranked on price strength.2 William O'Neil's book of 1988 turned that kind of screen into a method: look for stocks near their highs, with rising earnings and strong price action, and study those first.2 Much of what scanners show today, from top gainers to stocks near their 52-week high, began as a printed list.

Indicator screens arrived with indicators. J. Welles Wilder published the relative strength index in 1978, with 70 and 30 as the levels where a move is often called overbought or oversold.3 The 200-day moving average became the most quoted dividing line between a stock in a long uptrend and one in a long downtrend. Researchers later studied why stocks near their 52-week high tend to behave differently from the rest; one well-known paper of 2004 found that nearness to the 52-week high explained a large part of price momentum in the United States.4

In India, screen-based trading itself is barely thirty years old. The NSE began electronic trading in shares in November 1994, replacing the open outcry of the trading ring with a screen that any member could watch.5 Stock futures followed in November 2001, and the list of shares with futures and options, the F&O stocks, became the set most active traders follow.5 When online broking spread in the 2000s, screeners moved from newspapers to websites, and then to the trading app itself. QuantPower's scanner runs inside the same app as the chart, the option chain and the order sheet, so the path from a list to a closer look takes one tap.

The ready-made scans

Intraday scans

These scans read one snapshot of today's prices for every instrument in the set you chose, so they reflect the market at the moment you run them.

ScanWhat it findsNote shown on each result
Top gainersStocks up on the day, largest rise firstThe price and the day's change
Top losersStocks down on the day, largest fall firstThe price and the day's change
Most active (volume)Stocks with the most shares traded todayThe day's volume
Volume spikeStocks trading far more than usual for this time of day, compared with their 20-day averageToday's volume as a multiple of normal
Opening range breakoutStocks trading above the high, or below the low, of their first 15 minutesThe range and how far beyond it the price is
Gap upStocks that opened more than 1% above yesterday's closeHow far above the close it opened
Gap downStocks that opened more than 1% below yesterday's closeHow far below the close it opened
Open = HighStocks whose open is still the day's high"Open = High"
Open = LowStocks whose open is still the day's low"Open = Low"
Under ₹100Stocks in the chosen set trading below ₹100The price and the day's change

Open = High and Open = Low are popular with intraday traders. A stock whose open is still its low has not traded below its first price all day, which some traders read as buyers in control since the open. The scan only reports that fact; it does not say what happens next. For the strategy built on it, see the open high low strategy.

Technical scans

These scans read each stock's completed candles, from your broker's own history, on the candle size you choose (5-minute, 15-minute, hourly or daily), and add the live price as the candle that is still forming. The 200-day and 52-week scans always use daily closes, because that is what the names mean.

ScanWhat it findsNote shown on each result
RSI 14 below 30Stocks whose 14-day RSI is below 30The RSI value
RSI 14 above 70Stocks whose 14-day RSI is above 70The RSI value
Above 200-day averageStocks trading above their 200-day simple moving averageHow far above, in per cent
Below 200-day averageStocks trading below their 200-day simple moving averageHow far below, in per cent
20 EMA crossed above 50 EMAStocks where the 20-day exponential average crossed above the 50-day one today"Crossed today"
20 EMA crossed below 50 EMAStocks where the 20-day average crossed below the 50-day one today"Crossed today"
Supertrend flipped upStocks whose Supertrend (10, 3) turned from a sell line to a buy line on the latest closed candleThe Supertrend level
Supertrend flipped downStocks whose Supertrend (10, 3) turned from a buy line to a sell line on the latest closed candleThe Supertrend level
Near 52-week highStocks within 2% of their highest close of the last 250 trading daysThe 52-week high
Near 52-week lowStocks within 2% of their lowest close of the last 250 trading daysThe 52-week low

A stock with fewer than 200 daily closes is left out of the 200-day scans rather than measured against a shorter average. A stock with less than 30 closes is left out of every technical scan. Both rules keep the results honest: a stock is listed only when the condition can be measured properly.

Open interest scans

A scan's results: the stocks that match your conditions, with price, the day's change and volumeA scan's results: the stocks that match your conditions, with price, the day's change and volume
A scan's results: the stocks that match your conditions, with price, the day's change and volume

These scans read the futures and options of each underlying and compare today's open interest with the previous day's.

ScanWhat it findsNote shown on each result
Futures long buildupFutures with price and open interest both upThe price change and the open interest change
Futures short buildupFutures with price down and open interest upThe price change and the open interest change
Futures short coveringFutures with price up and open interest downThe price change and the open interest change
Futures long unwindingFutures with price and open interest both downThe price change and the open interest change
Option OI changeThe call and put strikes with the largest change in open interest today, for the index or stock you pickThe strike, the side and the change

The buildup names describe which side was the more active, judged from the price. They are a reading of positions already taken, not a forecast, and a label on a small change in open interest carries little weight, which is why every result shows the size of the change.

Choosing what to scan

Every scan runs over a set of instruments you choose: the Nifty 50, the Nifty 500, the F&O stocks, index options, MCX commodities or one of your own watchlists. The F&O stocks are the starting choice, for three reasons.

  • Liquidity. A share is admitted to the F&O segment only if it meets the exchange's tests for size and trading activity. These are among the most traded shares on the exchange, so a scan result is usually a share you can actually buy or sell in size without moving the price far.
  • Options and futures. Every F&O stock also has futures and options. A trader who finds a setup on the scanner can act on it in the cash share, the future or an option, from the same stock sheet.
  • Speed. A smaller, active universe can be scanned in seconds, with daily history kept ready for the whole session.

The list of F&O stocks changes from time to time as the exchange adds and removes shares. The scanner reads the current list each day, so a share added to the segment appears in scans once it has enough history.

The other sets serve other jobs. The Nifty 500 widens the net for a positional trader in shares, at the cost of more thinly traded names. A watchlist scan checks only the stocks you already follow, which is often the most useful list of all. MCX commodities let a commodity trader run the same technical scans on gold, silver, crude oil and the rest, during their own market hours. Index options suit the open interest scans, which look for the strikes where positions changed most.

What the scanner does not do

A clear list of limits saves misreading the results:

  • It does not rank stocks by quality. The order of a list reflects only how strongly each stock meets the scan's condition: the largest gap first, the lowest RSI first.
  • It does not use fundamentals. There are no conditions on earnings, valuations or ownership. Those belong to a different kind of research.
  • It does not keep history of its own lists. Each run is a fresh look at the market. If you want a record, keep a log of what each scan found and when.

How a scan runs, step by step

  1. Open Scanners from the menu. The ready-made scans are grouped under Intraday and Technical, and your own under Saved.
  2. Choose the set and the candle size, then tap a scan. QuantPower runs it.
  3. QuantPower reads the prices. For an intraday scan it reads one snapshot of live prices. For a technical scan it also reads each stock's candles of the size you chose, which it keeps for the session.
  4. Each stock is checked against the scan's condition. Stocks that cannot be measured, for example because a price is missing, are skipped.
  5. The matches are sorted by how strongly each one meets the condition, and the top 50 are shown.
  6. Tap Run again for a fresh list. A list is kept for one minute, so running the same scan twice within a minute shows the same result.

The first scans of the day

Technical scans need daily history for every stock, and QuantPower reads it from your broker's history service a few dozen stocks at a time. The first technical scan of a day therefore fills in over a few minutes, and the screen shows how many stocks have been scanned so far. After that the closes are kept for the day and every scan is quick. If market data cannot be reached at all, the scan says so plainly instead of showing an empty list that looks like "no matches".

Build your own scan

A custom scan is a list of one to five conditions. Each condition compares two things with "greater than" or "less than", and a stock is listed only when every condition holds.

Each side of a condition can be:

  • A number, such as 100 or 30.
  • The price, today's live price.
  • A simple moving average (SMA) of 2 to 200 days.
  • An exponential moving average (EMA) of 2 to 200 days.
  • The RSI of 2 to 200 days.
  • The MACD histogram, with the usual 12, 26 and 9 settings.

Custom scans run on the candle size you choose, 5-minute, 15-minute, hourly or daily, with the live price as the forming candle, over the set of instruments you choose. You can save up to 20 of them, give each a name, and run any of them again from the Saved tab. To keep scans quick for everyone, one client can start one new custom scan every 10 seconds; a scan that someone has run in the last minute comes back at once.

Writing good conditions

  • One idea per scan. "Price above the 50-day EMA and RSI above 55" describes one idea, a stock in an uptrend with momentum. Adding unrelated conditions turns it into three ideas and usually finds nothing.
  • Two or three conditions are usually enough. A scan with one condition finds too much. A scan with five often finds nothing on most days.
  • Put the filter first in your head, the trigger second. A trend filter such as "price above the 200-day SMA" narrows the field; a trigger such as "RSI 14 below 40" picks the moment.
  • Check the result by eye. Open three or four of the stocks it lists and confirm the chart shows what you meant.

What each technical scan measures

The technical scans use well-known measures. Knowing what each one counts helps you read the list.

RSI 14

The relative strength index compares the size of recent up-closes with recent down-closes over 14 days and turns the result into a number from 0 to 100. Above 70 means the up-closes have been much larger than the down-closes; below 30 means the opposite. Wilder, who designed it, used those levels to mark moves that had gone far in one direction.3 In a strong trend RSI can stay beyond them for a long time, so the scan is best read as "these stocks have moved hard", not "these stocks will turn".

The 200-day average

The 200-day simple moving average is the average of the last 200 daily closes, about ten months of trading. A stock above it has, on average, been rising over that period; a stock below it has been falling. The two scans show how far above or below the average each stock sits, in per cent. A stock just above the line and one 30% above it are both "above the 200-day average", but they are in very different places.

20 EMA and 50 EMA crosses

An exponential moving average gives more weight to recent closes than a simple one does, so it turns sooner. When the 20-day EMA crosses above the 50-day EMA, the shorter-term trend has turned up relative to the medium-term one. The scan lists only stocks where the cross happened today, comparing today's averages with yesterday's. A cross that happened last week does not appear; open the chart to see older ones.

52-week highs and lows

The scan takes the highest and lowest daily close of the last 250 trading days, roughly a year, and lists stocks within 2% of either. It uses closes, not intraday highs and lows, so a stock that touched a new high during the day and closed below it may not appear.

Scanner, alert or signal: which to use

QuantPower has three tools that watch prices for you. They do different jobs:

ToolWhat it watchesWhat it does when the condition is metBest for
ScannerMany stocks at once, when you run itLists the stocks that matchFinding candidates
AlertOne instrument, all the time while the market is openTells you in the appBeing told when a level you chose is reached
Signal algoOne instrument, on every closed candleTells you, or places the order you set, or starts or stops an algoActing on a tested rule

A common routine uses all three: a scan finds five stocks after the close, alerts on two of them tell you when they reach your levels the next day, and a signal algo on the one you trade most carries out the rule you have tested.

Reading the intraday lists together

The intraday scans are most useful side by side. A few combinations traders often look at:

  • Gap up and Open = Low. A stock that gapped up and has not traded below its open since is holding its gap. A stock that gapped up and is now on the Top losers list has given it back.
  • Top gainers and Most active. A rise on the heaviest volume of the day has more traders behind it than a rise on light trade.
  • Under ₹100 and Most active. Low-priced F&O stocks with heavy volume move in larger percentage steps for each rupee, which matters for position size.
  • Gap down and Open = High. A stock that opened lower and has not traded above its open is under steady selling.

None of these combinations is a rule to trade. They are quick ways to narrow two hundred stocks to the handful worth opening.

A worked example: pullbacks in an uptrend

Suppose you want shares in a long uptrend that have had a short pullback. Written as conditions:

  1. Price is greater than SMA 200.
  2. EMA 20 is greater than EMA 50.
  3. RSI 14 is less than 45.

The first two conditions describe the uptrend: the price is above its long-term average, and the medium-term average is above the slower one. The third describes the pullback: momentum has cooled. Save it as "Uptrend pullback" and run it after the close each day.

On most days the list is short. Open each result's chart and look at the last few weeks. A stock that has drifted down to its 50-day average on falling volume is a different picture from one that has dropped sharply on heavy volume, even though both pass the scan. The scan does the first sort; the chart and your own rules do the rest.

If you want to be told the moment one of these stocks crosses back above a level, set an alert on it. Our market alerts can watch a price or an indicator rule on each one, and tell you in the app when it fires.

A worked example: the morning gap list

Suppose you trade gaps at the open. At about 9:20 am:

  1. Run Gap up and Gap down. Each lists the stocks that opened more than 1% away from yesterday's close, the largest gap first.
  2. Run Most active (volume). A gap on a stock that is also near the top of the volume list has more participation behind it than a gap on thin trade.
  3. Open the chart of the three or four stocks that appear on both lists. Look at where yesterday's high and low were, and whether the gap has already started to fill.
  4. Check the F&O ban list and any results or news due that day before you place anything.

The scans save you from opening two hundred charts. They do not tell you which way a gap will go. For the rules of the trade itself, see the gap trading strategy.

From a scan to a trade

A scan finds candidates. What happens next is up to you, and QuantPower keeps every next step one tap away:

  • Open the stock. Tap a result to open its stock sheet, with a small chart, the day's prices and buttons for the full chart, the option chain, buy and sell, and adding it to a watchlist.
  • Watch it. Add it to one of your watchlists (up to 20 lists of 100 scrips each), or set a price alert or an indicator alert on it.
  • Turn the idea into a rule. The same indicators are available in signal algos, which watch a condition on one instrument and tell you, or place the order you set, when it fires. See signal trading.
  • Test it first. A rule you would use as a trigger can be backtested on the stock's own past candles before it goes near real money.

A scan is not a recommendation. Before you act on any result, check its liquidity, whether it is in the F&O ban period, and whether results or other news are due.

Scanning with Quanty and your own AI app

Quanty, the AI assistant in the QuantPower app, can run the ready-made scans for you and read out the results, and open the Scanners page when you ask. Describe a scan of your own in words, such as "F&O stocks above their 200-day average with RSI below 40 on the hourly chart", and Quanty writes the conditions, shows them to you to check, and saves the scan under a name when you agree, ready in your Saved tab. A request to build something costs 5 tokens. If you use your own AI app, such as Claude or ChatGPT, Connect AI gives it a scanner tool, so it can run the ready-made scans and read the results with your permission. Neither Quanty nor a connected AI app tells you which stock to trade. Both are software, not advisers.

How to use a scanner well

  1. Scan at fixed times, for example soon after the open, at midday and after the close, rather than watching all day. The intraday lists change every minute; your decisions should not.
  2. Know what each scan measures. The intraday scans use today's prices; the technical scans use the candle size you chose. A "20 EMA crossed above 50 EMA" result on daily candles means the daily averages crossed, not a five-minute chart.
  3. Check volume first. A move on thin volume often fails. The Most active list is a quick check.
  4. Avoid the first few minutes. Opening prices can be noisy, and the technical scans fill in over the first few minutes of the day.
  5. Keep a log. Note which scans led to trades and how those trades went. After a few months you will know which scans are worth your time.
  6. Use saved scans for your routine. If you run the same three scans every day, save them so the routine takes a minute.

Common mistakes

  • Treating a list as a signal. A stock near its 52-week high is near its 52-week high. Whether it goes higher is a separate question.
  • Reading RSI 30 as "must bounce". A stock in a strong downtrend can stay below 30 for weeks. RSI extremes say a move has been strong, not that it is over.
  • Mixing time frames. A daily scan and a five-minute entry can disagree. Run the scan on the candle size the trade lives on.
  • Ignoring liquidity and the ban list. A scan does not know whether you can trade the stock's options today.
  • Building too many scans. Twenty saved scans that you never look at are worse than three you run every day.

Where stock scanning is going

The direction is plain enough. Scans are moving from fixed lists towards conditions written in ordinary words, which AI assistants turn into rules a trader can read and check. They are also moving closer to the order: the list, the chart and the order sheet now sit in one app. Both changes make scanning faster, and both make it more important to know exactly what a scan measures before acting on what it finds.

Pricing

Scanners are free in QuantPower, with no token charge: the ready-made scans, your own scans and saved scans alike. Charts, the option chain and the strategy builder are free too. Tokens (1 token = ₹1, GST extra) pay for live algos, Forward tests, backtests beyond the free ones and AI use. Asking Quanty to build a scan costs 5 tokens. See pricing.

Start with 500 free tokens

Connect your broker, build a strategy and test it on paper before a single live order goes out.

Frequently asked questions

Which stocks does the QuantPower scanner cover?

The set you choose: the Nifty 50, the Nifty 500, the F&O stocks, index options, MCX commodities or one of your watchlists. The F&O stocks are the starting choice.

How often do the scan results update?

Each time you tap Run again. A result is kept for one minute, so two runs within a minute show the same list. Technical scans also use today's live price as the forming bar.

Can I save my own scans?

Yes. Build a scan of one to five conditions and save it with a name. You can keep up to 20 saved scans and run any of them again from the Saved tab.

What can a custom scan condition use?

The price, a number, a simple or exponential moving average of 2 to 200 days, RSI of 2 to 200 days, and the MACD histogram, compared with "greater than" or "less than". Every condition must hold for a stock to be listed.

Does a scan place orders?

No. A scan only lists stocks. To act on one, open it and place the order yourself, or set up a signal algo with your own rule.

Why does the first technical scan of the day take longer?

It reads daily history for each stock from your broker, a few dozen stocks at a time, and keeps it for the day. The screen shows how many stocks have been scanned while it fills in.

References

  1. Richard D. Wyckoff, *Studies in Tape Reading* (1910), on reading price and volume from the ticker tape
  2. William J. O'Neil, *How to Make Money in Stocks* (1988), and Investor's Business Daily, founded 1984 (investors.com)
  3. J. Welles Wilder Jr., *New Concepts in Technical Trading Systems* (1978), on the relative strength index
  4. Thomas J. George and Chuan-Yang Hwang, "The 52-Week High and Momentum Investing", *The Journal of Finance* (2004)
  5. National Stock Exchange of India: history of the capital market and equity derivatives segments (nseindia.com)
  6. QuantPower: scanner presets, limits and data sources, from the app's code, checked 12 November 2026
Scanner results describe market data and are not investment advice. Trading involves substantial risk.