An alert is the simplest piece of automation there is: the software watches a level so that you do not have to. Used well, it frees you from the screen and makes you act on levels you chose calmly, before the market moved. Used badly, it becomes noise you learn to ignore. The steps below set up each kind of alert in the app, and the sections after them cover how to choose levels, how many alerts to keep, and what to do when one fires.
Before you start
- A connected broker. Alerts use live prices from your own broker account. Without a connected broker, the app shows no live prices, so price alerts cannot be checked.
- A reason for each alert. An alert works best at a level from your trading plan: a support or resistance level, a stop you want to watch, a breakout point, or a level from a calculator such as the pivot point calculator.
- Notifications allowed on your phone, if you want alerts when the app is closed. Allow notifications for the QuantPower app in your phone's settings.
What you can alert on
| Alert | Example | How it is checked | How many at once |
|---|---|---|---|
| Price above | Nifty futures above 25,200 | Continuously while the market is open | Up to 100 live price alerts |
| Price below | HDFC Bank below 1,600 | Continuously while the market is open | Included in the 100 |
| Up by a percentage | Reliance up 2% on the day | Continuously while the market is open | Included in the 100 |
| Down by a percentage | Bank Nifty down 1% on the day | Continuously while the market is open | Included in the 100 |
| An indicator rule | RSI(14) crosses above 70 on 15-minute candles | Once per closed candle | Up to 50 live rule alerts |
| Open interest | Open interest at the Nifty 25,500 call above 1 crore, or up 20% on the day | While the market is open | With your price alerts |
Alerts work on indices, stocks, futures and options, in every market QuantPower covers: NSE and BSE cash and F&O, commodity and currency, each checked during its own market hours.
A short history of trading alerts
Before screens were everywhere, traders asked their broker's dealer to call them when a price was reached. In the 2000s, broker terminals added price alerts that popped up on the screen, and some brokers sent alerts by SMS. Smartphones made the alert a notification in a pocket, and by the 2010s every trading app offered price alerts.
Charting platforms then made alerts programmable. A trader could set an alert on an indicator crossing a level, a trendline being broken or a pattern forming, and have it checked by the platform's servers whether or not the chart was open. In India, many traders connected those alerts to algo platforms through webhooks, so that an alert could place an order. Since 1 April 2026, SEBI's framework for retail algo trading has required such automatic orders to run through brokers under exchange rules, from a registered static IP.1 An alert that only notifies you is not an algo; one that places an order is.
Step 1: Open Alerts
- Open the menu and choose Alerts.
- The screen has two tabs: Live for alerts that are waiting, and Triggered for alerts that have been hit.
- Tap + (New alert) at the top right.
You can also start an alert from a chart or from a stock's page; the instrument is then filled in for you.
Step 2: Choose the stock or index
In Stock or index, type part of the name or symbol, for example "RELIANCE" or "NIFTY", and choose from the list. For futures and options, choose the exact contract, with its expiry and strike, so the alert watches the right price.
Step 3: Choose the condition
Under Alert me when the price is, choose one of four conditions:
- Above: the alert fires when the price goes above your level.
- Below: the alert fires when the price goes below your level.
- Up %: the alert fires when the day's change goes above your percentage.
- Down %: the alert fires when the day's change falls below minus your percentage.
Step 4: Enter the level
For Above and Below, enter the Price (₹). For Up % and Down %, enter the Change (%); the field starts at 2%. Check the level against the chart before you save it: an alert a few points from the current price will fire almost at once.
Step 5: Add a note
The Note field is optional and holds up to 120 characters. Write why the level matters and what you plan to do when it is reached, for example "breakout above range; buy if 15-minute close holds". When the alert fires weeks later, the note tells you what you meant.
Step 6: Set the alert
Save it. A message confirms the alert, for example "Alert set · NIFTY above 25,200", and the alert appears in the Live tab.
Step 7: When the alert fires
When the condition is met, QuantPower sends a notice to the app at once, the status strip shows it, and the alert moves from Live to Triggered. With notifications allowed, the notice also reaches your phone when the app is closed. An alert fires once; set it again if you want to watch the same level another day.
Step 8: Manage your alerts
- Delete a live alert that no longer fits your plan. Too many alerts are easy to ignore.
- Review the Triggered tab at the end of the day and note what you did with each alert.
- Keep the count small. A dozen alerts you act on are worth more than a hundred you scroll past, and a short list is easier to keep up to date as your plan changes.
Setting alerts from the chart
The chart is often the easiest place to set a price alert, because the level is in front of you.
- Open the chart of the instrument, on the time frame you use to plan.
- Find the level: a prior high, the edge of a range, a trendline or a pivot.
- Start a new alert from the chart; the instrument is filled in, and you enter the level and the condition.
- Add a note and save. The alert appears in the Live tab with the rest.
Arth.live charts inside QuantPower have 201 indicators, 89 drawing tools, and 44 candle patterns and 25 chart patterns marked on the chart, so many of the levels traders alert on can be read straight off it. Your open orders, positions and GTT triggers also appear on the chart as lines, so you can see at a glance whether an alert level sits near an order you already have.
Asking Quanty
Quanty, the assistant in the app, can help you turn a plan into rules. Describe the condition in plain words, for example "tell me when Bank Nifty closes a 15-minute candle above the day's high with RSI above 60", and Quanty can build it as a signal for you to check, saved switched off, so that it notifies you or prepares the order only once you turn it on. Quanty is software, not an adviser: it will not tell you which level to watch or which way the market will go.
How many alerts is too many
There is no fixed number, but there is a simple test: do you act on, or at least consciously decide about, every alert that fires? If you find yourself dismissing notifications without reading them, you have too many. A useful rule of thumb is a handful of levels per instrument you actively trade, plus your stops and targets. Use the note field to make each alert's purpose clear, and delete alerts as soon as their reason has passed. The app allows up to 100 live price alerts; that is a ceiling, not a target.
When an alert did not fire: a checklist
- Is it in the Live tab? If it is in Triggered, it fired earlier, perhaps at a moment you missed.
- Is the direction right? "Above 25,200" fires when the price goes above 25,200, not when it falls to it.
- Was the market open? Alerts are checked during each instrument's own hours.
- Is your broker connected? Without a connected broker there are no live prices to check.
- Is it a rule alert? It fires on the close of the candle that meets the rule, not before.
- Did the price touch the level? A wick that reaches 25,199 does not cross 25,200.
Alerts on indicator rules
Price alerts watch a level. Rule alerts watch a condition on a chart: an indicator crossing a level or another indicator.
- Open a chart of the instrument and choose the time frame, for example 15 minutes.
- Add the indicator, for example RSI(14), from the chart's indicator list.
- Set an alert on the rule, for example "RSI(14) crosses above 70".
- Choose Once to end the alert at the first hit, or Repeat to keep it running.
A rule alert is checked once per closed candle, at most once a candle, so it fires on the close of the candle that meets the rule, not in the middle of it. Up to 50 rule alerts can be live at once. A chart alert that you set only in your browser works while that chart is open; to have a rule watched with the chart closed, save it as a rule alert in your account.
Alerts on open interest
Open interest alerts tell you when positions build or unwind at a strike or in a futures contract.
- Choose the futures contract or the option strike, for example the Nifty 25,500 call in the current weekly expiry.
- Choose the condition: open interest above or below a level, or a change in open interest by a percentage on the day.
- Enter the level and save.
An open interest alert is useful when you trade around levels where option writers concentrate: a sharp rise in call open interest at a strike above the index, or a sudden fall in put open interest below it, can tell you that the range traders were defending is changing. Read it together with price; the option chain shows both at a glance.
How you are notified
| Where | When | Cost |
|---|---|---|
| In the app, on the status strip and the Triggered tab | At once, while the app is open | Free |
| On your phone as a push notification | At once, with notifications allowed | Free |
| By e-mail, for indicator alerts set up for e-mail | Within moments, through a background job | 1 token buys 20 messages |
In-app alerts never cost tokens. If you have no tokens, an e-mail is skipped and the in-app alert still arrives.
Linking an alert to an action
An alert only notifies. If you would place the same order every time an alert fires, there are three ways to let QuantPower act on it:
- A signal algo watches the condition itself and, when it fires, notifies you with the order ready (one-touch), places the order itself once you arm it (auto), or starts or stops an algo. A signal that places or prepares its own order costs no tokens. See signal trading.
- A webhook is a private URL that a charting site or any tool can call to switch your linked algos on and enter, or stop them and square off.
- An Arth.live chart alert can be linked to one of your webhook signals, so the chart, the alert and the order are in one place.
| Alert | Signal algo, one-touch | Signal algo, auto | |
|---|---|---|---|
| Places an order | No | Only when you touch | Yes, with every risk check |
| Needs you at the screen | Yes, to act | Yes, to confirm | No |
| Best for | Levels you judge case by case | Rules you want to see before acting | Rules you follow the same way every time |
Alerts and your running algos
If you run algos, you do not need alerts to watch their stops: each algo watches its own targets and stops, and writes every entry, exit and refusal to its activity log. Alerts are more useful for the things algos do not decide:
- The account as a whole. Smart Exit and the daily loss limit act on the whole account; an Up % or Down % alert on the index tells you why they might be about to.
- The market around a strategy. An alert on the index near a short strike, or an open interest alert at that strike, tells you when conditions are changing for an option-selling algo.
- Your broker session. Brokers end a session every day; the algo card warns you before an entry if you are signed out.
For more on how alerts fit with signals and algos, see the market alerts page.
Alerts for option traders
Option traders use alerts differently from stock traders, because an option's price depends on time and volatility as well as on the underlying.
- Alert on the underlying, not only on the option. A short strangle on Nifty is usually managed from the index level. Set Above and Below alerts on Nifty a little inside your short strikes, so you know when a strike is under threat while there is still time to adjust.
- Alert on the option's premium when your stop is in premium terms, for example "short 25,500 call above ₹80", so the alert fires near the price at which you would exit.
- Use open interest alerts at your strikes. A sharp change in open interest at a short strike often comes before the price tests it.
- Remember expiry. An alert on an option contract stops being useful after that contract expires. Set new alerts on the next contract when you roll.
Alerts for intraday traders
Intraday traders need alerts that are close to the action without firing on every tick.
- Mark the opening range. After the first 15 or 30 minutes, set Above and Below alerts just outside the range's high and low.
- Mark the previous day's high, low and close, where many intraday traders place orders.
- Use 5-minute or 15-minute rule alerts for confirmation, such as a close above VWAP, rather than price alerts alone.
- Clear them at the close. Intraday levels rarely matter the next morning; delete them so tomorrow starts clean.
Alerts for swing traders
Swing traders hold positions for days or weeks and check the market less often.
- Set alerts at the edges of your plan: the stop, the target, and a level halfway between where you would tighten the stop.
- Use Up % and Down % alerts on the stocks you hold, so a large move on news reaches you even if no level was crossed.
- Use daily rule alerts, such as a close below the 50-day average, for exits that should wait for a close rather than react to every tick.
- Pair alerts with GTT orders. A GTT order at the stop exits for you, for up to 365 days; the alert tells you it happened, or is about to.
Alerts across markets and hours
Each market has its own hours and holidays, and alerts follow them. NSE and BSE equity and F&O trade in the day, with F&O trading until 3:40 pm since 3 August 2026. Commodity contracts on MCX trade into the evening, and currency contracts have their own session. A price alert on a crude oil contract can fire at 9 pm; one on a stock cannot, because the stock's market is closed. If you trade evening commodities, check that phone notifications are allowed and that you are able to act at that hour before you set the alert.
A daily routine with alerts
- Before the open, review yesterday's Triggered tab. Delete alerts whose reason has passed.
- Set the day's levels: the previous day's high and low, the opening range edges once it forms, and any level from your plan.
- During the day, act on each alert by your plan, or note why you did not.
- After the close, move swing alerts to new levels if your plan has changed, and check that your phone notifications are still allowed.
- Once a week, count how many alerts you acted on. If it is fewer than half, you are setting too many.
Alerts and Forward test
If an alert keeps leading to the same trade, test that trade as a rule. Build it as a signal algo, run it in Forward test on live prices with test money, and compare its results with what you did by hand when the alert fired. If the rule does as well as your judgement, let it run in one-touch mode first, so each fire shows you the order ready to place. If it does better, arm it in auto mode. If it does worse, keep the alert and your judgement.
Worked example: a breakout watch
A trader is watching Nifty futures, which have spent a week between 24,950 and 25,180. She sets two price alerts: Above 25,200 with the note "range break; buy if 15-min close holds above", and Below 24,930 with the note "range break down; no trade before RBI". She also sets a rule alert on the 15-minute chart: close crosses above the 20-period EMA, Repeat. On Thursday at 11:05 am the Above alert fires on her phone. She opens the chart, waits for the 11:15 close, sees it hold above 25,200, and places the trade with her stop below the range. The Below alert stays live in case the break fails.
Worked example: watching a stop without sitting at the screen
A trader holds a swing position in Infosys bought at 1,520 with a mental stop at 1,480. He cannot watch the market during work hours. He sets a price alert Below 1,485 with the note "near stop; exit at 1,480 or set GTT". Better still, he places a GTT order at 1,480 so the exit happens without him, and keeps the alert as an early warning. An alert reminds; an order acts.
Worked example: an open interest shift
A trader sells a Nifty weekly strangle with the short call at 25,500. She sets an open interest alert on the 25,500 call: down 25% on the day. On Monday afternoon it fires: call writers are closing positions as the index rises towards the strike. She checks the chart, sees the index at 25,380 and rising, and decides to adjust the call leg before the strike is tested.
Choosing good levels
- Use levels you can explain: prior highs and lows, round numbers where orders gather, pivot levels, the edges of a range, the price where your stop or target sits.
- Avoid levels inside the day's noise. If the index moves 100 points in a normal hour, an alert 20 points away tells you nothing.
- Set alerts slightly before the level when you need time to act, for example 10 points before a breakout level, so that you are at the screen when the level is reached.
- Pair price and indicator alerts when one confirms the other, such as a price break with a volume or RSI rule on the same time frame.
Limits to know
| Limit | Value |
|---|---|
| Live price alerts | Up to 100 |
| Live rule alerts | Up to 50 |
| When price alerts are checked | While the instrument's market is open |
| When rule alerts are checked | Once per closed candle, at most once a candle |
| Browser-only chart alerts | Only while that chart is open |
| What an alert can do | Notify; never place an order |
These limits come from the app's own settings.2
Common problems
| Problem | What to do |
|---|---|
| No notification on the phone | Allow notifications for the QuantPower app in your phone's settings |
| No alerts at all | Check that your broker is connected; without it there are no live prices to check |
| The alert fired later than expected | Rule alerts fire when the candle closes, not during it |
| The alert did not fire | Check the level, the direction (Above or Below) and that the alert is in the Live tab |
| The alert fired at once | The price was already past the level when you saved it |
| An e-mail alert did not arrive | Check your token balance; without tokens the e-mail is skipped |
Common mistakes
- Too many alerts. If you ignore most of them, you will ignore the one that matters.
- No note. A level without a reason is hard to act on weeks later.
- Treating an alert as a stop. An alert does not exit a position; a stop order or an algo's stop does.
- Alerting on a delayed price. Use your broker's live feed, not a delayed public quote.
- Forgetting to reset. A price alert fires once; set it again if you still want the level watched.
Where trading alerts are going
Alerts are becoming conditions rather than levels: rules on indicators, candle patterns, chart patterns and open interest, checked on every closed candle. AI assistants can now set them from a sentence. And the line between an alert and an order has become a regulatory one: an alert that notifies you is a tool; an alert that places an order is part of an algo, under the rules in force since 1 April 2026.1 Keeping that line clear in your own setup, alerts for decisions you take and signals for rules you trust, keeps both useful.
Start with 500 free tokens
Connect your broker, build a strategy and test it on paper before a single live order goes out.
Frequently asked questions
Do alerts place trades?
No. An alert only notifies you. To place orders from a condition, use a signal algo in one-touch or auto mode, or link the alert to a webhook that starts an algo.
Can I set alerts on options?
Yes, on option prices and on option open interest, as well as on the underlying index or stock. Choose the exact contract, with its expiry and strike.
Can I get alerts on my phone?
Yes. Allow notifications for the QuantPower app, and alerts reach your phone as push notifications, as well as in the app.
Why did my RSI alert fire a few minutes after RSI crossed the level?
Rule alerts are checked once per closed candle. If the cross happens in the middle of a 15-minute candle, the alert fires when that candle closes, provided the rule still holds.
Can I set an alert for the evening commodity session?
Yes. Alerts follow each contract's own market hours, so an alert on an MCX contract is checked during MCX's evening session. Make sure notifications are allowed on your phone if you want to be told at that hour.
What is the difference between an alert and a GTT order?
An alert notifies you when a price is reached. A GTT order waits for its trigger price and then sends an order through the order path, for up to 365 days. Use a GTT when you want the order placed; use an alert when you want to decide.
Will I be charged tokens for my alerts?
No, alerts in the app and on your phone are free. Only e-mail messages for indicator alerts cost tokens, 1 token for 20 messages.
Related guides
- Market alerts: what alerts do and how they fit with signals and algos
- How to use the option chain: reading OI, IV and Greeks before you set an alert
- Set up multiple charts: watching several instruments while alerts run
References
- SEBI: circular on safer participation of retail investors in algorithmic trading, 4 February 2025, in force for every broker from 1 April 2026 (sebi.gov.in)
- QuantPower: alerts, limits, notifications and token prices from the product documentation and the app (checked 12 November 2026)